第4章 データのバックアップ
本製品のデータをバックアップする
共有フォルダ単位でバックアップできます。
バックアップには、10 Gbpsで通信できるLAN端子を使用することをおすすめします。
Diagram showing the backup setup. A central 'ネットワーク' (Network) unit with 8 ports is connected via LAN3 cables to two NAS units. The top unit is labeled 'LAN3 端子 (固定 IP アドレス)' and 'バックアップ元 (本製品)'. The bottom unit is labeled 'LAN3 端子 (固定 IP アドレス)' and 'バックアップ先 (予備の TeraStation)'.
バックアップ動作モードについて
本製品のバックアップ機能では以下の動作モードを設定できます。
通常バックアップ
バックアップ元からバックアップ先へ、毎回すべてのデータをバックアップする方法です。
日付+時間のフォルダが作成され、その中にデータがバックアップされます。
(2017年4月1日12時34分であれば、「201704011234」というフォルダが作成されます)
| バックアップ元データ | バックアップ先データ | 4 回目の時点で復旧できるデータ | |
|---|---|---|---|
| 1 回目 | A A追加 | A | A |
| 2 回目 | A B B追加 | A B | A B |
| 3 回目 | A B' C B上書き、C追加 | A B' C | A B' C |
| 4 回目 |
A B'
|
A B' D | A B' D |
1 回目から 4 回目までの、任意の時点のデータを復旧できます。
Diagram illustrating the '通常バックアップ' (Normal Backup) process over four iterations. It shows the state of 'バックアップ元データ' (Backup source data), 'バックアップ先データ' (Backup destination data), and '4 回目の時点で復旧できるデータ' (Data that can be restored at the 4th iteration). Iteration 1: Source adds A; Destination has A; Restorable has A. Iteration 2: Source adds B; Destination has A, B; Restorable has A, B. Iteration 3: Source updates B to B' and adds C; Destination has A, B', C; Restorable has A, B', C. Iteration 4: Source deletes C and adds D; Destination has A, B', D; Restorable has A, B', D. A note indicates that data from any iteration from 1 to 4 can be restored.
バックアップ元、バックアップ先として選択できるフォルダは以下のとおりです。
-
•
バックアップ元として選択できるフォルダ
- ◦ 本製品の共有フォルダ (infoフォルダを除く) ※1
- ◦ 本製品に接続したUSBドライブ ※1
- ◦ 本製品以外のバッファローNASの共有フォルダ ※2
- ◦ rsync対応NASの共有フォルダ