第10章 ドライブ故障時の交換手順

ドライブが故障したときは、以下の手順でドライブを交換してください。ドライブの交換手順は、お使いの機種によって異なります。

TS51210RHシリーズのドライブを交換する

ランプを確認する

ドライブが故障すると次のようにランプが点灯または点滅します。ドライブを交換する前に必ず確認してください。

Diagram of the TS51210RH series drive unit showing the front panel with three drive bays. On the left side of the top bay is a control panel with 'RESET', 'FUNC', and 'A/D' buttons. Callout 1 points to the 'A/D' button, which is labeled as the ERROR lamp. Callout 2 points to a small circular lamp on the right side of the top bay, labeled as the DRIVE ERROR lamp. The middle and bottom bays also have similar small lamps on their right sides, labeled 5 and 9 respectively.
Diagram of the TS51210RH series drive unit showing the front panel with three drive bays. On the left side of the top bay is a control panel with 'RESET', 'FUNC', and 'A/D' buttons. Callout 1 points to the 'A/D' button, which is labeled as the ERROR lamp. Callout 2 points to a small circular lamp on the right side of the top bay, labeled as the DRIVE ERROR lamp. The middle and bottom bays also have similar small lamps on their right sides, labeled 5 and 9 respectively.

1 ERRORランプ

赤色点灯

本製品内蔵のドライブが故障しています。

2 ドライブエラーランプ

赤色点滅

故障したドライブの電源がONの状態です。ドライブを抜かないでください。

赤色点灯

故障したドライブの取り外し処理がされた状態です。ドライブを抜くことができます。